Classic Bronco Complete Audio Kit | (1966-1977 Ford Bronco)

Description

The 1st generation Ford Bronco presents many challenges when it comes to installing a high quality audio system. The factory speaker location is limited to a single small dash speaker, the limited footwell space and parking brake limit kick panel options and everything has to be able to handle the elements of an open top vehicle. Born out of years of experience building custom Broncos, TPD HiFI has the answer! Our audio kit combines the legendary Morel Virtus Carbon Nano 6 inch speaker with TPD’s revolutionary shallow kick panel for a total depth of 1.5” allowing plenty of clearance for your feet and a functional parking brake. Then we add a 4-channel Musway amplifier with built in DSP and a Musway powered 7 inch subwoofer for a 6-channel, audiophile quality, sound system that is 100% designed around your classic Bronco. Not familiar with tuning DSPs, we preload our base tune into the amplifier so you can fine tune with your head unit’s audio settings. In addition, we include mounting brackets for the amp and powered subwoofer that allows them to be mounted out of sight. To top it off we include a pre-wired harness and instructions. Everything you need to install the system is included except for your source (head unit). Want to have a smooth dash with no head unit? Our system has built in Bluetooth connectivity and can also be used as a stand-alone system. For maximum output and sound quality we do recommend a quality head unit with RCA outputs of 2-5 volts.

Average lead time: 2-3 Weeks 

Vehicle Compatibility

1966-1977 Ford Bronco (First Gen)

Included in kit

1. 1966-1977 Ford Bronco Kick Panel Kit with Morel Virtus Nano Carbon 62 Integra Speakers

2. Musway SW-A7 Powered Underseat Subwoofer System

3. Musway D1S 4-channel Class A/B amplifier with 6-channel Digital Sound Processor (DSP)

4. Remote Bass Adjustment Knob with Status LED

5. Pre-wired Subwoofer Wiring Harness

6. Pre-wired Amplifier/Kick Panel Harness

7. Mounting Bracket for Subwoofer; Mounts Under Passenger Seat

8. Mounting Bracket for amplifier; Mounts Under Dashboard

9. Mounting Hardware

10. Installation Instructions 

Features

· Kick panels and subwoofer are secured using factory bolts

· Factory parking brake remains functional

· Amplifier mounts under the dash to keep it safe from the elements

· Pre-wired harness included, just connect power and ground to the battery and connect 4 wires under the dash

· Remote bass knob with system status LED allows easy tuning of your bass level

· All hardware, connectors and fuses are included

· FINALLY, an audio system worth of the Legendary Classic Bronco! 

Specs

Speaker - MOREL VIRTUS NANO CARBON INTEGRA 62
Size & Configuration - 6½" Point Source
Power Handling - 100w RMS/300w Peak
Sensitivity (2.93V/1M) - 87 dB

DSP with Amplifier - MUSWAY D1S
Frequency response 15Hz-22KHz (±0.5dB)
Distortion - THD (1 kHz at 4 0, 90% Power) 50.022%
S/N ratio at A weighted, 1 V, Max. Power: 95dB
Input sensitivity: 5V RMS (High-level)
Input impedance 2200 (High-level)
OUTPUT POWER (RMS) at 13.8 VDC, 1% THD: 25 W x 4 at 4Ohms 
Dimension: 165(L) x 98(W) x 32(H)
Net Weight: 450g

Loaded Enclosures - MUSWAY SW-A7
Subwoofer -170mm
Output Power RMS - 1 x 80W
Output Power Max Frequency Range - 1 x 600W
Lowpass Filter - 22-150Hz (-3 dB)
PHASE - 0°/180° RCA Inputs
Bass Boost - 0-12dB @45Hz
Operating Voltage  - +12V (9-15V), negative ground
Fuse Rating -15A
Dimensions (B x H x L) - 200mm x 74mm x 272mm

Install Guide

Click here for Instructions PDF