1966-1977 Bronco Kick Panels | Morel Virtus Nano Carbon Integra 62
Description
Take your 66-77 Bronco’s audio stage to the next level! The 1st Generation Bronco has been one of the most challenging vehicles to get quality sound from your audio system, until now. No longer is it necessary to cut up the doors or install a small 4” speaker in the stock dash location. Our kick panels do not interfere with the parking brake and allow a full size 6 inch Morel HiFi speaker to be installed without cutting. Our ultra-thin design packs a big punch in a small package. Featuring Morel’s Virtus Nano Carbon Integra shallow-mount speakers for the best of both worlds. At 1.5” thick, you’ll get every bit of sound quality you want, without losing precious space.
The panels install in minutes, requiring drilling only one hole for a ¼-20 rivet nut.
Average lead time: 1-2 Weeks
Features:
• Includes Morel Virtus Nano Carbon Integra 62 speakers. The most innovative shallow speakers in car audio. The 6.5 inch woofers measure only 0.7 inches (17mm) deep
• Installs using the Bronco’s door limit strap hardware and the included 10-32 Well nut
• Stainless steel hardware included
• Clears factory parking brake lever without interference
• Morel Acudamp sound deadener pre-installed to panels
• Manufactured of durable ABS and paintable to match your interior
• One pair of 2-way crossovers included
• Made in USA
Vehicle Compatibility
1966-1977 Ford Bronco (First Gen)
Specs
Speakers: Morel Virtus Nano Carbon Integra 62
Size & Configuration - 6½" Point Source
Power Handling - 100w RMS/300w Peak
Sensitivity (2.93V/1M) - 87 dB
Install Guide
Click here for Instruction PDF
Pairs well with
1966-1977 Bronco Kick Panels | Morel Virtus Nano Carbon Integra 62
The 1966 – 1977 Ford Bronco has skyrocketed to fame over the past decade or so with everything from proper nut and bolt restorations to fire-breathing fuel injected resto-mods. The common thread within these Classic Broncos is the challenge presented to install great audio without major modifications. Past options have been somewhat limited to a small dash-mounted dual voice coil speaker that provides no stereo separation and can barely be heard over the wind noise, speakers mounted in the rear quarters that provide no front stage, or huge kick panel speakers that interfere with the parking brake and AC installations.
IMPOSSIBLY THIN
TPD HiFi’s custom loaded kick panels are made specifically for Morel’s shallow mount speaker line, pushing the limits of sound quality in a thin, low profile package. A match made in heaven with no sacrifices!
TOP NOTCH AUDIO
Elevate your audio experience with our kick panels paired seamlessly with Morel™ high-end audio speakers. Immerse yourself in premium sound quality, where precision engineering meets top-tier components for a rich, immersive, and dynamic listening experience. Designed to complement each other, these kick panels and Morel speakers deliver a harmonious blend of style and superior audio performance.
EASY INSTALL
Engineered to seamlessly integrate with your vehicle, our kick panel utilizes the existing Door Strap Hardware, eliminating the need for complex installation procedures.
PRE-INSTALLED SOUND DEADENER
Equipped with Morel's Acudamp Sound Deadener, meticulously designed to diminish noise transfer into your vehicle. With this advanced technology seamlessly integrated into your car's interior, enjoy unparalleled clarity in your audio journey.
SPECIFICATIONS
VIRTUS NANO CARBON INTEGRA 62
2-Way Component System with Patented Morel Shallow 6.5" Woofer and 1.1" Integrated Tweeter| Size & Configuration | 6½" 2-way Pointsource |
| Power Handling(WRMS)/ Peak Power (W) | 100/300 |
| Sensitivity (2.93V/1M) | 88DB |
| Frequency Response | 50-22000 |
| Crossover | MXR200.4 |
MUSWAY D1S + TPD CUSTOM BRACKET
The Musway D1S is a revolutionary class A/B amplifier with built in DSP to bring the best out of HiFi speakers.| Frequency response | 15Hz-22KHz (±0.5dB) |
| Distortion | THD (1 kHz at 4 0, 90% Power) 50.022% |
| Max. Power | 95dB |
| Input sensitivity | 2V RMS (High-level) Input impedance 2200 (High-level) |
| Gain Margin | mute, -59dB ~ 0dB |
| Dimension | 165(L) x 98(W) x 32(H) |
| Net Weight | 450g |
MUSWAY SW-A7 + TPD CUSTOM BRACKET
Powerful Subwoofer with built in amp that mounts under the seat.| Type | ACTIVE UNDER SEAT-SUBWOOFER-SYSTEM |
| Class | Integrated Class A/B amplifier |
| Power | 300 Watts RMS |
| LP Crossover | 50-150 Hz |
| Bass Boost | 0-12dB @ 45 Hz |
| Subsonicfilter | 20 Hz fixed |
| Phase Switch | 0/180°, RCA Inputs |
| Auto Turn-On | High Level Inputs |
| Dimensions | 200 x 74 x 272 mm |
